The excitement and enjoyment of a home theater system are greatly enhanced by electrostatic sound. From soft intimate sound to floor-shaking high-intensity sound, the Sound Lab home theater speakers will pull you into the action like “being there.”
The MiniStat is a versatile speaker that performs flawlessly as front and rear speakers in home theater systems. The compact size of the MiniStat seems disproportionate to the remarkable sonic capability of this speaker. The MiniStat is also an excellent choice for service in compact high-end audio systems.
High efficiency, wide dispersion and incomparable clarity are just some of the characteristics of the MiniStat. Furthermore, AC power isn’t required to energize the speaker as is usually the case with electrostatic speakers, which makes the MiniStat as convenient to use as a conventional speaker.
Specifications:
Frequency response:
45 Hz to 20 kHz
Audio power (watts):
(Min/max) 10/150 (music power)
Horizontal Dispersion:
90 degrees
Vertical Dispersion:
40 degrees
Impedance (nominal):
8 ohms
Sensitivity:
94 dB/1W/1m
Controls:
Brilliance
Woofer diameter:
6 1/2″
Height x Width x Depth:
20″ x 9″ x 12″
Weight: (per speaker)
32 pounds
Finishes:
Medium oak is standard (Other natural and painted finishes available)
The Marquee fills the center spot in home theater systems with astonishing realism. Three electrostatic panels cover the audience with incomparably articulate sound that only electrostatic technology can do.
High efficiency, wide dispersion and incomparable clarity are just some of the characteristics of the Marquee. Furthermore, AC power isn’t required to energize the speaker as is usually the case with electrostatic speakers, which makes the Miarquee as convenient to use as a conventional speaker.
Specification:
Frequency response:
45 Hz to 20 kHz
Audio power (watts):
(Min/max) 10/150(music power)
Horizontal Dispersion:
50 degrees
Vertical Dispersion:
25 degrees
Impedance (nominal):
4 ohms
Sensitivity:
94 dB/1W/1m
Controls:
Brilliance
Woofer diameter:
6 1/2″ X 2
Height x Width x Depth:
9″ x 35″ x 12 1/2″
Weight: (per speaker)
48 pounds
Finishes:
Medium oak is standard (Other natural and painted finishes available)
The WallStat is essentially a flattened MiniStat. The WallStat can be flush-mounted in a 6″ deep wall or it may be hung on the wall. The intent is to make the WallStat inconspicuous. It incorporates the same technology as the MiniStat with one exception, it employs an 8″ low-frequency driver and can therefore provide greater low-frequency impact.
High efficiency, wide dispersion and incomparable clarity are just some of the characteristics of the WallStat. Furthermore, AC power isn’t required to energize the speaker as is usually the case with electrostatic speakers, which eliminates the necessity of providing in-wall AC power.
Specifications:
Frequency response:
45 Hz to 20 kHz
Audio power (watts):
(Min/max) 10/200 (music power)
Horizontal Dispersion:
90 degrees
Vertical Dispersion:
40 degrees
Impedance (nominal):
8 ohms
Sensitivity:
94 dB/1W/1m
Controls:
Brilliance
Woofer diameter:
8″
Height x Width x Depth:
31″ x 14″ x 5″
Weight: (per speaker)
43 pounds
Finishes:
Satin black is standard (Other natural and painted finishes available)
The Dynasty stands tall, not just in its physical 72” height, but also in its remarkable acoustic performance. Whether one is standing or sitting or listening off to the side, the sound of the Dynasty is dynamic and full spectrum. Perhaps, the most succinct commentary that can be given of the remarkable performance of the Dynasty is that it has been the reference speaker of high-end audio reviewers.
The Dynasty is a hybrid speaker, using a line-source electrostatic panel to reproduce mid and high frequencies and a special low-distortion 10 inch dynamic driver to reproduce lower frequencies. The Dynasty stands its ground as being an excellent choice for use in serious high-end music systems. Further, the Dynasty is also a welcome addition to high-end theater systems.
Specifications:
Frequency response:
27 Hz to 20 kHz
Audio power (watts):
(Min/max) 50/500 (music power)
Horizontal Dispersion:
90 degrees
Vertical Dispersion:
Panel Height
Impedance (nominal):
8 ohms
Sensitivity:
94 dB/1W/1m
Controls:
Brilliance 3dB steps rotary switch
Woofer diameter:
10″
Height x Width x Depth:
72.5″ x 18.25″ x 3″ (base:19″)
Weight: (per speaker)
95 pounds
Finishes:
Medium Oak is standard (Other natural and painted finishes available)